Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Otsuka, Satoshi; Shizukawa, Yuta; Tanno, Takashi; Imagawa, Yuya; Hashidate, Ryuta; Yano, Yasuhide; Onizawa, Takashi; Kaito, Takeji; Onuma, Masato*; Mitsuhara, Masatoshi*; et al.
Journal of Nuclear Science and Technology, 60(3), p.288 - 298, 2023/03
Times Cited Count：4 Percentile：78.52(Nuclear Science & Technology)JAEA has been developing 9Cr-oxide dispersion strengthened (ODS) tempered martensitic steel(TMS) as a candidate material for the fuel cladding tubes of sodium-cooled fast reactors(SFRs). The reliable prediction of in-reactor creep-rupture strength is critical for implementing the 9Cr-ODS TMS cladding tube in the SFR. This study investigated the quantitative correlation between the creep properties of 9Cr-ODS TMS at 700 
C and the dispersions of nanosized oxides by analyzing the creep data and the material's nanostructure. The possibility of deriving a formula for estimating the in-reactor creep properties of 9Cr-ODS TMSs based on an analysis of the nanostructure of neutron-irradiated 9Cr-ODS TMSs was also discussed. The creep properties of 9Cr-ODS TMS at 700 C closely correlated with the dispersion of nanosized oxide particles. The correlation between creep-rupture lives and nanosized oxide particle dispersion was determined using existing creep models. The elucidation of correlation between the stress exponent of secondary creep rate and the nanostructure is essential to enhance future modeling reliability and formulation.
Kakiuchi, Kazuo; Udagawa, Yutaka; Yamauchi, Akihiro*
JAEA-Research 2022-001, 21 Pages, 2022/06
JAEA-Research-2022-001.pdf:1.84MB
The primary cause of cladding embrittlement during loss-of-cool ant accident (LOCA) is the increase in oxygen concentration in the metallic layer and associated microstructural change due to oxidation. In the case of cladding high temperature rupture, inner surface oxidation by the steam ingress and the consequent increase in hydrogen partial pressure result in hydrogen absorption (secondary hydriding) localized in the axial direction at the distance apart from the rupture opening as is well known from preceding studies. In order to understand the effect of cladding microstructural changes on mechanical property of a fuel rod under LOCA conditions in a more precise and quantitative manner, the nanoindentation method has been applied to evaluation of mechanical properties of a cladding specimen after a LOCA simulated test; results for two samples taken from the rupture opening part and secondary hydriding part were compared with each other. The fraction of plastic work during the indentation was evaluated from the load-displacement curve in addition to hardness and Young's modulus. The plastic work fraction at the secondary hydriding part was found to be clearly lower than that at the rupture opening part and rather close to that in the ZrO
and 
-Zr(O) layers, suggesting the significant ductility reduction of the secondary hydriding part despite its relatively low oxygen concentration.
Ukai, Shigeharu*; Ono, Naoko*; Otsuka, Satoshi
Comprehensive Nuclear Materials, 2nd Edition, Vol.3, p.255 - 292, 2020/08
Fe-Cr-based oxide dispersion strengthened (ODS) steels have a strong potential for high burnup (long-life) and high-temperature applications typical for SFR fuel cladding. Current progress in the development of Fe-Cr-based ODS steel claddings is reviewed, including their relevant mechanical properties, e.g. tensile and creep rupture strengths in the hoop directions. In addition, this paper reviewed the current research status on corrosion resistant Fe-Cr-Al-based ODS steel claddings, which are greatly paid attention recently as the accident tolerant fuel claddings for the light water reactor (LWR) and also as the claddings of the lead fast reactors (LFR) utilizing Pb-Bi eutectic (LBE) coolant.
Otsuka, Satoshi; Tanno, Takashi; Oka, Hiroshi; Yano, Yasuhide; Tachi, Yoshiaki; Kaito, Takeji; Hashidate, Ryuta; Kato, Shoichi; Furukawa, Tomohiro; Ito, Chikara; et al.
2018 GIF Symposium Proceedings (Internet), p.305 - 314, 2020/05
Oxide Dispersion Strengthened (ODS) steel has been developed worldwide as a high-strength and radiation-tolerant steel used for advanced nuclear system. Japan Atomic Energy Agency (JAEA) has been developing ODS steel as the primary candidate material of Sodium cooled Fast Reactor (SFR) high burn-up fuel cladding tube. Application of high burn-up fuel to SFR core can contribute to improvement of economical performance of SFR in conjunction with volume and hazardousness reduction of radioactive waste. This paper described the current status and future prospects of ODS tempered martensitic steel development in JAEA for SFR fuel application.
Nemoto, Yoshiyuki; Kaji, Yoshiyuki; Kanazawa, Toru*; Nakashima, Kazuo*; Tojo, Masayuki*
Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 8 Pages, 2019/05
Oxidation behaviour of Zr cladding in SFP accident condition was evaluated by using a thermobalance in this work, and the obtained data were applied to construct oxidation model for SFP accident condition. For the validation of the constructed oxidation model, oxidation tests using a long cladding tube 500mm in length were conducted in conditions simulating SFP accidents, such as flow rate of the atmosphere in spent fuel rack, temperature gradient along the axis of cladding, and heating-up history. Thickness of oxide layer formed on the surface of cladding samples was evaluated by cross sectional observation, and compared with calculation results obtained by using the oxidation model. The detail of experimental results and validation of the oxidation model will be discussed.
Otsuka, Satoshi; Kaito, Takeji
Enerugi Rebyu, 39(1), p.44 - 46, 2019/01
For performance improvement of next-generation nuclear system such as fast reactor, it has been expected to develop advanced material resistant to severe in-reactor environment (i.e. high-dose neutron irradiation at high-temperature). Japan Atomic Energy Agency (JAEA) has been developing Oxide Dispersion Strengthened (ODS) ferritic steel for long life fuel cladding tube of fast reactor. Application of ODS ferritic steel to fast reactor fuel can extend the fuel life time twice or more as long as the fuel with conventional cladding tube (i.e. modified SUS316), thus reducing fuel exchange frequency and fuel cost. It can be adaptable to high-temperature plant operation, which is favorable for improvement of power generation efficiency. This paper interprets the development of ODS ferritic steel cladding tube for sodium-cooled fast reactor, which has been led by JAEA for dozens of years.
Nemoto, Yoshiyuki; Kaji, Yoshiyuki; Onizawa, Takashi*; Kanazawa, Toru*; Nakashima, Kazuo*; Tojo, Masayuki*
Proceedings of Annual Congress of the European Federation of Corrosion (EUROCORR 2018) (USB Flash Drive), 8 Pages, 2018/09
The authors proposed oxidation models based on oxidation data which previously obtained in high temperature oxidation tests on small sample of Zircalloy-2 (Zry2) cladding in dry air and in air/steam mixture environment. The oxidation models were implemented in computational fluid dynamics (CFD) code to analyse oxidation behavior of long cladding sample in hypothetical spent fuel pool (SFP) accident conditions. The oxidation tests were conducted using Zry2 cladding sample 500 mm in length. The oxide layer growth in dry air was well reproduced in the calculation using the oxidation model, meanwhile which in air/steam mixture was overestimated atmosphere composition change anticipated in the spent fuel rack during the accident, and its influence on the oxidation behaviour of the cladding were discussed in consideration of the oxidation model improvement.
Ukai, Shigeharu*; Otsuka, Satoshi; Kaito, Takeji; de Carlan, Y.*; Ribis, J.*; Malaplate, J.*
Structural Materials for Generation IV Nuclear Reactors, p.357 - 414, 2017/00
Times Cited Count：70 Percentile：99.33(Energy & Fuels)Oxide dispersion strengthened (ODS) steels are the most promising candidate materials for fuel cladding of generation IV nuclear reactors. The progress and current status for development of ODS/FM(ferrite-martensite) steels conducted mainly in Japan and France are overviewed. The chemical compositions of ODS/FM steels are listed. Fabrication routes of cladding tube are mentioned for ferrite-type ODS steels using recrystallized process and martensite-type one using -
phase transformation. The optimized process is identical for both countries. Joining process between cladding and end-plug has been also developed by using the pressurized resistance upset welding method. The improvements brought by ODS/FM steels in high-temperature strength and irradiation resistance are verified.
Nemoto, Yoshiyuki; Kaji, Yoshiyuki; Ogawa, Chihiro; Nakashima, Kazuo*; Tojo, Masayuki*; Goto, Daisuke*
Fushoku Boshoku Kyokai Dai-62-Kai Zairyo To Kankyo Toronkai Koenshu (CD-ROM), p.23 - 24, 2015/11
In order to clarify the air oxidation behavior of the cladding at high temperatures for study on improvement of safety for accident conditions in spent fuel pool, the oxidation tests for both small specimens under constant temperature conditions and long specimens under loss of coolant simulated temperature conditions were carried out, and the knowledge for influence of both temperature gradient and preoxide film on oxidation behavior of the cladding were obtained in this study.
Kuroda, Masatoshi*; Yamanaka, Shinsuke*; Nagase, Fumihisa; Uetsuka, Hiroshi
Nuclear Engineering and Design, 203(2-3), p.185 - 194, 2001/01
Times Cited Count：14 Percentile：68.97(Nuclear Science & Technology)no abstracts in English
Ogawa, Hiroaki; Saburi, Tei; Kiuchi, Kiyoshi
JAERI-Research 2000-055, 57 Pages, 2000/11
JAERI-Research-2000-055.pdf:3.73MB
no abstracts in English
; ; Sakamoto, Naoki; *; Akasaka, Naoaki;
JNC TN9400 2000-095, 110 Pages, 2000/07
JNC-TN9400-2000-095.pdf:13.57MB
The effects of high fluence irradiation and swelling on the transient burst properties of austenitic steel fuel claddings; PNC316 and 15Cr-20Ni stcel, which were irradiated as the MONJU type fuel assemblies (MFA-1&MFA-2) in the FFTF reactor, were investigated. The temperature-transient-to-burst tests were conducted on a total of eight irradiation conditions. Fractographic examination and TEM observation were performed in order to evaluate the effect of high dose irradiation on the transient burst property and the relation between failure mechanism and microstructural change during rapid (ramp) heating. The results of the PIE showed that there was no significant effect of irradiation on the transient burst properties of these fuel claddings under the irradiation conditions examined. the results obtained in this study are as follows; (1)The rupture temperature of the irradiated PNC316 fuel cladding of MFA-1 was as same as that of our previous works for the fluence range up to 2.13
10
n/m
. There was no noticeable decrease in rupture temperature with increasing fluence in lower hoop stress region(
100MPa). (2)The rupture temperature of the irradiated 15Cr-20Ni fuel cladding of MFA-2 was almost as same as that of as-received cladding for the hoop stress range up to about 200MPa. The rupture temperature did not decrease significantly with fluence. (3)The rupture temperature of the irradiated PNC316 cladding tested at hoop stress 69MPa, which was the design hoop stress for MONJU fuel, was 1055.6C. This suggested that the design cladding maximum temperature limit for MONJU (830C) was conservative. (4)There was no obvious relation between rupture temperature, swelling and microstructural change during transient heating under the irradiation conditions examined.
Inohara, Yasuto*; Ioka, Ikuo; Fukaya, Kiyoshi; Kiuchi, Kiyoshi; Kuroda, Yuji*; Miyamoto, Satoshi*
Fushoku Boshoku Kyokai Dai-47-Kai Zairyo To Kankyo Toronkai Koenshu (B-204), p.177 - 180, 2000/00
no abstracts in English
Nakata, Masahito; Amano, Hidetoshi; ; Nishi, Masahiro; Nakamura, Jinichi; Furuta, Teruo; ;
HPR-345, 0, 9 Pages, 1995/00
no abstracts in English
Watanabe, Ryuzo*; *
PNC TJ9601 94-003, 87 Pages, 1994/03
This report is the PNC contract research for fiscal year of 1993 titled "Formation of Ti/SUS/Mo graded layer by slurry dipping." Fuel sheath material for FBR is used under a severe enviroment. The life of conventionally used SUS316 is known to be only two years. The development of long-life core material having high temperature strength, radiation resistance and anti-corrosion property is now essential. To create a super-long-life core materials for FBR it seems promising to employ the concept of functionally gradient material, in which these different materials are configurated with grading : as base material is used SUS316 stainless steel, the inner wall is made of Ti for the radiation resistant and anti-corrosion property with graded intermediate layers towards the base metal and the outer shell is the graded Mo layer for the corrosion resistance against liquid sodium. The shape of the core tube is a long cylindrical tube and its dimensions are 8.5mm in outer diameter, about 2m in length, shell thickness is 0.5mm and the thickness of the gradient layer is about 0.1mm. However, we have not yet acquired sufficient techniques to realize such shape and dimmensions, and the investigation is planned to get basic informations on the processing of the core materials with graded structures. Slurry dipping has been employed for forming a graded layer on curved inner and outer surfaces. And it is indispensable that the graded layers have showed sufficient thermal-stress relief function, as well as good bonding capability. In this year (FY 1993), the formation of the graded inner layer of Ti/SUS316 by slurry dipping was investigated. The formation procedure is briefly mentioned here as follows. Cylindrical green compacts of SUS304 stainless steel powder was prepared by die compaction and CIP as a substrate for slurry dipping. A coarse Ti powder was suspended in ethanol and milled by tumbler ball mill to get a slurry having an appropriate viscosity for dipping. The ...
Power Reactor and Nuclear Fuel Development Corporation
PNC TN9360 94-002, 100 Pages, 1994/02
no abstracts in English
Power Reactor and Nuclear Fuel Development Corporation
PNC TN9360 94-001, 95 Pages, 1994/02
no abstracts in English
; ; *; *; Yoshida, Eiichi;
PNC TN9450 92-004, 37 Pages, 1992/06
High Strength Ferritic/Martensitic Steel is one of the cardidate core materials for largescale FBR because of excellent resistance to swelling. This report are presented about the internal pressure creep of High Strength Ferritic/Martensitic Steel based on the R&D results obtained through the activities of material tests. Contents of the data sheet are as follows; (1) Material: High Strength Ferritic/Martensitic Steel Fuel cladding tube (
6.50.47.mm
) (2) Environment: In Air and In Sodium (3) Test temperature: 600 and 650C (4) Hoop stress: 9.4832.43 kgf/㎜ (5) Number of data: 13 points
